Take 1™ Advanced™

Impression Materials

VPS Impression Material

Take 1™ Advanced™ VPS impression material combines Kerr’s expertise in developing high-performance impression materials with recent technological advancements. Take 1™ Advanced™ is first system of VPS materials with an optimum combination of physical properties: strength, elasticity, dimensional stability and the ability to register detail in any environment.

Take 1™ Advanced™ provides the widest selection of setting times, delivery systems and consistencies for the perfect combination of mechanical properties in a material that feels like it was designed for your own technique preference, making it unnecessary to use various product lines to suit individual needs.

Standing apart from ordinary impression materials that focus on a single attribute, the unique chemistry of Take 1™ Advanced™ delivers complementary features that enhance overall performance.

Outstanding tear strength and elongation.
Strong, flexible material stretches around undercuts without tearing or distorting.
Hydrophilic wash material.
Displaces intraoral fluids to produce impressions with great detail and without voids or gaps.
Excellent dimensional stability.
Impressions will not distort due to dimensional change or temporary deformation.
Widest selection of viscosities, set times and delivery methods.
Helps to overcome common difficulties in impression taking and complements the clinician’s technique preference.

Packaging
Troubleshooting Guide
Downloads
More Info

Putty Hand-mix Refill

34144Take 1 Advanced Putty Fast SetContents: 1 Putty Base Fast Set (400 g), 1 Putty Catalyst Fast Set (400 g), 2 Putty Scoops, 18 Putty Spacers

Volume Refills

34962Take 1 Advanced Tray Volume Regular SetEach pack contains: 2 x 380 ml, 2 x bayonet rings

34963Take 1 Advanced Tray Volume Fast SetEach pack contains: 2 x 380 ml, 2 x bayonet rings

2-Cartridge Refills

34148Take 1 Advanced Bite RegistrationEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34149Take 1 Advanced Light Body Wash Fast SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34150Take 1 Advanced Light Body Wash Regular SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34152Take 1 Advanced Medium Fast SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34153Take 1 Advanced Medium Regular SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34158Take 1 Advanced Tray Fast SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

34159Take 1 Advanced Tray Regular SetEach pack contains: 2 x 50 ml Cartridge, 6 Large Mixing Tips. Regular Body Wash and Light Body Wash contain 6 Small Mixing Tips and 6 Small Intra-Oral Tips. Bite Registration contains 6 Large Mixing Tips and 6 Bite Registration Intra-Oral Tips.

Troubleshooting Guide

Problem	Evidence	Cause	Solution
Premature Set	Abrupt change from heavy to light-body material Muted detail around margin	Set time of wash/tray material not synched Exceeded working time of material	Begin mix of heavy and light viscosity concurrently Verify set times for heavy and light viscosities match Observe working time of materials
Deformation/Dimensional Change	Crowns too tall/short Open contacts Crown will not seat	Insufficient mix of material Impression removed too early Tray movement after seating Insufficient material elasticity Fluid absorption during disinfection process	Verify material is adequately mixed before seating and completely set prior to removal Use passive force to maintain tray position when using open-bite technique Verify no tooth contact with tray sides or impingement in closed-bite technique Choose material with adequate elasticity Follow disinfection protocol carefully
Tearing at Margin	Visible tears at margin Lack of flash extending apically around entire preparation	Material has insufficient tear strength Presence of severe undercuts Insufficient sulcular expansion	Use material with adequate tear strength Consider blocking out undercuts, especially in cases with gingival recession Ensure at least .5 mm sulcular expansion
Surface Inhibition or “Non-set”	Unset or mottled surface around preparation Lack of detail Shiny/wet appearance	Contamination due to latex gloves; direct contact with material or residue left on teeth Contamination due to temporary materials or composite Expired material or exceeded material shelf life	Use latex-free gloves when handling VPS material Rinse preparation area thoroughly after using other restorative materials Use automated mixing device to minimize exposure to contaminants Do not use expired material
Poor model detail	Small bubbles/indentations in cast Powdery cusps	Release of hydrogen gas from VPS impression after pouring cast Tooth contact with mesh lining of closed-bite impression tray	Follow manufacturer instructions regarding any delays for pouring models after taking impression Place cotton roll on contra-lateral side when using closed-bite trays to prevent direct tooth contact with tray; this prevents water from leaching through tray after cast has been poured
Voids in wash material	Visible voids in wash material around tooth preparation	Bubbles incorporated into material during mixing or loading syringe Bubbles incorporated while syringing material intraorally	Use automix systems Syringe material intraorally in continuous stream around each preparation; do not lift syringe tip from material
Insufficient or excessive compression	Insufficient: wash material flows away from preparation area Excessive: wash material displaced from preparation area; “burn through”	• Insufficient compression of wash material from adjacent tooth/tray or heavy-body material • Excessive compression of wash material due to high viscosity of tray material	Use tray viscosity material with greater compressive force, or use custom tray Use tray material with lower viscosity to avoid displacing wash material
Incomplete margin	Voids or “jumps” on margin	Inadequate tissue management Contamination from intraoral fluids Insufficient compression of wash material	Use Expasyl™ retraction paste to open sulcus and help maintain dry field Use hydrophilic wash material Select tray viscosity with adequate compression
Tooth contact with tray	Visible impingement	Incorrect size tray Tray seating not aligned with dentition	Verify tray has enough room for 2 mm of impression material between tooth and tray walls